CentOS 5.6 + Squid + rejik не работает

[sfefelov]

Так теперь по порядку ставил на x64 не заработало думал библиотеки не подходят, а вот и нет,
поставил i386 на него сквид Version 2.6.STABLE21(yum) поставил режик последней версии, и опа не работает...
точнее не неработает, а как то не так работает
в общем если дать команду service squid start то в логах появляется
##################################################################
Squid Cache (Version 2.6.STABLE21): Terminated abnormally.
CPU Usage: 0.040 seconds = 0.033 user + 0.007 sys
Maximum Resident Size: 22976 KB
Page faults with physical i/o: 0
Memory usage for squid via mallinfo():
total space in arena: 2680 KB
Ordinary blocks: 2548 KB 4 blks
Small blocks: 0 KB 0 blks
Holding blocks: 244 KB 1 blks
Free Small blocks: 0 KB
Free Ordinary blocks: 131 KB
Total in use: 2792 KB 95%
Total free: 131 KB 4%
2011/06/15 01:36:25| Starting Squid Cache version 2.6.STABLE21 for i686-redhat-linux-gnu...
2011/06/15 01:36:25| Process ID 10246
2011/06/15 01:36:25| With 1024 file descriptors available
2011/06/15 01:36:25| Using epoll for the IO loop
2011/06/15 01:36:25| DNS Socket created at 0.0.0.0, port 60975, FD 8
2011/06/15 01:36:25| Adding nameserver 188.168.31.10 from /etc/resolv.conf
2011/06/15 01:36:25| Adding nameserver 80.82.162.82 from /etc/resolv.conf
2011/06/15 01:36:25| helperOpenServers: Starting 5 'redirector' processes
2011/06/15 01:36:25| ipcCreate: /usr/local/rejik3/redirector: (13) Permission denied
2011/06/15 01:36:25| ipcCreate: /usr/local/rejik3/redirector: (13) Permission denied
2011/06/15 01:36:25| ipcCreate: /usr/local/rejik3/redirector: (13) Permission denied
2011/06/15 01:36:25| ipcCreate: /usr/local/rejik3/redirector: (13) Permission denied
2011/06/15 01:36:25| ipcCreate: /usr/local/rejik3/redirector: (13) Permission denied
2011/06/15 01:36:25| User-Agent logging is disabled.
2011/06/15 01:36:25| Referer logging is disabled.
2011/06/15 01:36:25| Unlinkd pipe opened on FD 18
2011/06/15 01:36:25| Swap maxSize 2048000 + 30720 KB, estimated 0 objects
2011/06/15 01:36:25| Target number of buckets: 7995
2011/06/15 01:36:25| Using 8192 Store buckets
2011/06/15 01:36:25| Max Mem size: 30720 KB
2011/06/15 01:36:25| Max Swap size: 2048000 KB
2011/06/15 01:36:25| Local cache digest enabled; rebuild/rewrite every 3600/3600 sec
2011/06/15 01:36:25| Rebuilding storage in /var/log/squid/cache (DIRTY)
2011/06/15 01:36:25| Using Least Load store dir selection
2011/06/15 01:36:25| Set Current Directory to /var/spool/squid
2011/06/15 01:36:25| Loaded Icons.
2011/06/15 01:36:25| Accepting transparently proxied HTTP connections at 0.0.0.0, port 3128, FD 20.
2011/06/15 01:36:25| Accepting ICP messages at 0.0.0.0, port 3130, FD 21.
2011/06/15 01:36:25| Accepting SNMP messages on port 3401, FD 22.
2011/06/15 01:36:25| WCCP Disabled.
2011/06/15 01:36:25| Ready to serve requests.
2011/06/15 01:36:25| WARNING: url_rewriter #5 (FD 13) exited
2011/06/15 01:36:25| WARNING: url_rewriter #4 (FD 12) exited
2011/06/15 01:36:25| WARNING: url_rewriter #3 (FD 11) exited
2011/06/15 01:36:25| Too few url_rewriter processes are running
FATAL: The url_rewriter helpers are crashing too rapidly, need help!

Squid Cache (Version 2.6.STABLE21): Terminated abnormally.
CPU Usage: 0.040 seconds = 0.033 user + 0.007 sys
Maximum Resident Size: 23920 KB
Page faults with physical i/o: 0
Memory usage for squid via mallinfo():
total space in arena: 2680 KB
Ordinary blocks: 2548 KB 4 blks
Small blocks: 0 KB 0 blks
Holding blocks: 244 KB 1 blks
Free Small blocks: 0 KB
Free Ordinary blocks: 131 KB
Total in use: 2792 KB 95%
Total free: 131 KB 4%
########################################################################
при этом если дать команду squid
#######################################################################
2011/06/15 01:44:45| Starting Squid Cache version 2.6.STABLE21 for i686-redhat-linux-gnu...
2011/06/15 01:44:45| Process ID 10416
2011/06/15 01:44:45| With 1024 file descriptors available
2011/06/15 01:44:45| Using epoll for the IO loop
2011/06/15 01:44:45| Performing DNS Tests...
2011/06/15 01:44:45| Successful DNS name lookup tests...
2011/06/15 01:44:45| DNS Socket created at 0.0.0.0, port 53492, FD 8
2011/06/15 01:44:45| Adding nameserver 188.168.31.10 from /etc/resolv.conf
2011/06/15 01:44:45| Adding nameserver 80.82.162.82 from /etc/resolv.conf
2011/06/15 01:44:45| helperOpenServers: Starting 5 'redirector' processes
2011/06/15 01:44:45| User-Agent logging is disabled.
2011/06/15 01:44:45| Referer logging is disabled.
2011/06/15 01:44:45| Unlinkd pipe opened on FD 18
2011/06/15 01:44:45| Swap maxSize 2048000 + 30720 KB, estimated 0 objects
2011/06/15 01:44:45| Target number of buckets: 7995
2011/06/15 01:44:45| Using 8192 Store buckets
2011/06/15 01:44:45| Max Mem size: 30720 KB
2011/06/15 01:44:45| Max Swap size: 2048000 KB
2011/06/15 01:44:45| Local cache digest enabled; rebuild/rewrite every 3600/3600 sec
2011/06/15 01:44:45| Rebuilding storage in /var/log/squid/cache (CLEAN)
2011/06/15 01:44:45| Using Least Load store dir selection
2011/06/15 01:44:45| Set Current Directory to /var/spool/squid
2011/06/15 01:44:45| Loaded Icons.
2011/06/15 01:44:45| Accepting transparently proxied HTTP connections at 0.0.0.0, port 3128, FD 20.
2011/06/15 01:44:45| Accepting ICP messages at 0.0.0.0, port 3130, FD 21.
2011/06/15 01:44:45| Accepting SNMP messages on port 3401, FD 22.
2011/06/15 01:44:45| WCCP Disabled.
2011/06/15 01:44:45| Ready to serve requests.
2011/06/15 01:44:45| Done reading /var/log/squid/cache swaplog (0 entries)
2011/06/15 01:44:45| Finished rebuilding storage from disk.
2011/06/15 01:44:45| 0 Entries scanned
2011/06/15 01:44:45| 0 Invalid entries.
2011/06/15 01:44:45| 0 With invalid flags.
2011/06/15 01:44:45| 0 Objects loaded.
2011/06/15 01:44:45| 0 Objects expired.
2011/06/15 01:44:45| 0 Objects cancelled.
2011/06/15 01:44:45| 0 Duplicate URLs purged.
2011/06/15 01:44:45| 0 Swapfile clashes avoided.
2011/06/15 01:44:45| Took 0.3 seconds ( 0.0 objects/sec).
2011/06/15 01:44:45| Beginning Validation Procedure
2011/06/15 01:44:45| Completed Validation Procedure
2011/06/15 01:44:45| Validated 0 Entries
2011/06/15 01:44:45| store_swap_size = 0k
2011/06/15 01:44:45| WARNING: url_rewriter #1 (FD 9) exited
2011/06/15 01:44:46| WARNING: url_rewriter #2 (FD 10) exited
2011/06/15 01:44:46| WARNING: url_rewriter #3 (FD 11) exited
2011/06/15 01:44:46| Too few url_rewriter processes are running
2011/06/15 01:44:46| storeDirWriteCleanLogs: Starting...
2011/06/15 01:44:46| Finished. Wrote 0 entries.
2011/06/15 01:44:46| Took 0.0 seconds ( 0.0 entries/sec).
FATAL: The url_rewriter helpers are crashing too rapidly, need help!

Squid Cache (Version 2.6.STABLE21): Terminated abnormally.
CPU Usage: 0.039 seconds = 0.034 user + 0.005 sys
Maximum Resident Size: 23296 KB
Page faults with physical i/o: 0
Memory usage for squid via mallinfo():
total space in arena: 2560 KB
Ordinary blocks: 2459 KB 10 blks
Small blocks: 0 KB 0 blks
Holding blocks: 244 KB 1 blks
Free Small blocks: 0 KB
Free Ordinary blocks: 100 KB
Total in use: 2703 KB 96%
Total free: 100 KB 4%
##########################################################################
то получаем рабочий сквид

На права доступа не отсылать, все уже раз 10 проверил и на х64 и на 386
проблема не в правах...

а возможно в том как стартует его service
cat /etc/init.d/squid
#!/bin/bash
# squid This shell script takes care of starting and stopping
# Squid Internet Object Cache
#
# chkconfig: - 90 25
# description: Squid - Internet Object Cache. Internet object caching is \
# a way to store requested Internet objects (i.e., data available \
# via the HTTP, FTP, and gopher protocols) on a system closer to the \
# requesting site than to the source. Web browsers can then use the \
# local Squid cache as a proxy HTTP server, reducing access time as \
# well as bandwidth consumption.
# pidfile: /var/run/squid.pid
# config: /etc/squid/squid.conf

PATH=/usr/bin:/sbin:/bin:/usr/sbin
export PATH

# Source function library.
. /etc/rc.d/init.d/functions

# Source networking configuration.
. /etc/sysconfig/network

# don't raise an error if the config file is incomplete
# set defaults instead:
SQUID_OPTS=${SQUID_OPTS:-"-D"}
SQUID_PIDFILE_TIMEOUT=${SQUID_PIDFILE_TIMEOUT:-20}
SQUID_SHUTDOWN_TIMEOUT=${SQUID_SHUTDOWN_TIMEOUT:-100}

# determine the name of the squid binary
[ -f /usr/sbin/squid ] && SQUID=squid

prog="$SQUID"

# determine which one is the cache_swap directory
CACHE_SWAP=`sed -e 's/#.*//g' /etc/squid/squid.conf | \
grep cache_dir | awk '{ print $3 }'`
[ -z "$CACHE_SWAP" ] && CACHE_SWAP=/var/spool/squid

RETVAL=0

start() {

#check if the squid conf file is present
if [ ! -f /etc/squid/squid.conf ]; then
echo "Configuration file /etc/squid/squid.conf missing" 1>&2
exit 6
fi
. /etc/sysconfig/squid

# don't raise an error if the config file is incomplete.
# set defaults instead:
SQUID_OPTS=${SQUID_OPTS:-"-D"}
SQUID_PIDFILE_TIMEOUT=${SQUID_PIDFILE_TIMEOUT:-20}
SQUID_SHUTDOWN_TIMEOUT=${SQUID_SHUTDOWN_TIMEOUT:-100}

if [ -z "$SQUID" ]; then
echo "Insufficient privilege" 1>&2
exit 4
fi

for adir in $CACHE_SWAP; do
if [ ! -d $adir/00 ]; then
echo -n "init_cache_dir $adir... "
$SQUID -z -F -D >> /var/log/squid/squid.out 2>&1
fi
done
echo -n $"Starting $prog: "
$SQUID $SQUID_OPTS >> /var/log/squid/squid.out 2>&1
RETVAL=$?
if [ $RETVAL -eq 0 ]; then
timeout=0;
while : ; do
[ ! -f /var/run/squid.pid ] || break
if [ $timeout -ge $SQUID_PIDFILE_TIMEOUT ]; then
RETVAL=1
break
fi
sleep 1 && echo -n "."
timeout=$((timeout+1))
done
fi
[ $RETVAL -eq 0 ] && touch /var/lock/subsys/$SQUID
[ $RETVAL -eq 0 ] && echo_success
[ $RETVAL -ne 0 ] && echo_failure
echo
return $RETVAL
}

stop() {
. /etc/sysconfig/squid

# don't raise an error if the config file is incomplete.
# set defaults instead:
SQUID_SHUTDOWN_TIMEOUT=${SQUID_SHUTDOWN_TIMEOUT:-100}

echo -n $"Stopping $prog: "
$SQUID -k check >> /var/log/squid/squid.out 2>&1
RETVAL=$?
if [ $RETVAL -eq 0 ] ; then
$SQUID -k shutdown &
rm -f /var/lock/subsys/$SQUID
timeout=0
while : ; do
[ -f /var/run/squid.pid ] || break
if [ $timeout -ge $SQUID_SHUTDOWN_TIMEOUT ]; then
echo
return 1
fi
sleep 2 && echo -n "."
timeout=$((timeout+2))
done
echo_success
echo
else
echo_failure
if [ ! -e /var/lock/subsys/$SQUID ]; then
RETVAL=0
fi
echo
fi
return $RETVAL
}

reload() {
. /etc/sysconfig/squid
# don't raise an error if the config file is incomplete.
# set defaults instead:
SQUID_OPTS=${SQUID_OPTS:-"-D"}

$SQUID $SQUID_OPTS -k reconfigure
}

restart() {
stop
start
}

condrestart() {
[ -e /var/lock/subsys/squid ] && restart || :
}

rhstatus() {
status $SQUID && $SQUID -k check
}

probe() {
return 0
}

case "$1" in
start)
start
;;

stop)
stop
;;

reload)
reload
;;

restart)
restart
;;

condrestart)
condrestart
;;

status)
rhstatus
;;

probe)
exit 0
;;

*)
echo $"Usage: $0 {start|stop|status|reload|restart|condrestart}"
exit 2
esac

exit $?

прошу помощи, не прикольно после обновления сидеть вручную стартовать сквиду

[Slava]

Как установить? пункт 14

Если не поможет, то посмотрите в сторону систем контроля доступа, например selinux и если подобная включена, выключите для теста.

[sfefelov]

Все спасибо помогло
косяк реально в selinux был